Pool equipment

The plumbing system consists of a number of parts, the main parts of plumbing and running water, it is necessary to use a water pump to water the water inlet and water pipes, it is suggested that you use a water pump for the water intake part to enter the pool and fill the pool at full speed. You should also connect the water outlet tube from the water outlet to the sewer to get the water out of it, it is best to use more extensive water outlet tubes for water removal.

Equipment needed for use includes: purifier and disinfectant, water sterilization system, elbow receiver system up to 3 cubic meters, water video system (water hardness dH̊7), pond and floor disinfection section (available) floor pool Or there is a carpet) is clear.

The overall pool layout is such that space is considered to be the size of at least 10 square meters, for the room of the equipment and the boiler.

An ordinary swim pool has different parts to be used to optimize its performance from integrated facilities. The facility is located in a place called the powerhouse, including pumps, koil source, sand filter, heat exchanger, hardness, hot water, and

The powerhouse is designed based on three general sectors, including water purification, pumping part and heating unit. in the engine intake design, its units are analyzed separately to consider the equipment needed for the well – being of swimmers

Heating the pool can be made by your radiators, neurotransmitters attached to the system, and the bases for absorbing and using solar energy.

The heating of the floor provides more comfort, but only when K is less than 0 / 7 or the room temperature is less than 29 ° C.

Pool covers:

Thermal power loss is reduced by 50 % to 70 % using the pool finish. The advantage of using swimming pool finishes is to increase the safety coefficient when the pool is not used, reducing water evaporation, reducing the consumption of antiseptic materials due to the prevention of their evaporation and the prevention of external pollutants into the pool. pools are used in pools to close the pool in the winter, as well as special structural and structural features.

The pool covers can be divided to save energy consumption in the following categories:

Air clear or bubble covers:

These overlays are made up of transparent and transparent materials. The air trapped in these silos is treated as a thermal insulation and prevents heat loss. These types of coatings have good resistance to prevent rain and snow from the pool and are impervious to water vapor.

In order to maintain these silos against a pool in the face of normal winds, there is no need to use packing, ropes and heavy obstacles. The advantage of this kind is their price. These overlays also operate at night as an insulating material and reduces the heat loss of the pool. The defects of this type are their light – style and low strength, which may be affected by the wind or falling objects on them from the pool. These overlays are designed only to prevent heat loss, which is of course a very valuable trait.

sponge covers:

sponge covers are like thin sheets of thin ice that cover the pool area or a Jacuzzi. These overlays are made of عایق and non – absorbent material and have high resistance to water vapour diffusion. The ability of sunlight transmission in these silos is not very suitable. In order to increase the durability of the finish, they are usually chosen from UV rays. To keep them under normal weather conditions and mild winds don ” t need to be used, ropes and heavy barriers.

Special – made covers:

These complexes are usually used to prepare the pool in the winter season and maintain safety. These complexes help keep the pool clean by preventing the entry of weeds and other foreign pollutants. In the winter season, these overlays are best suited to prevent stains in the pool and protect the skin from hard weather conditions.

2021 04/Sep